Publications

Showing 31 - 40 of 79 Publications
Pavement Rutting Repeatability and Bias Error Checks for a Laser Profilometer
This test method defines the procedure for conducting repeatability and bias of measurement checks for rut measurements made by a laser profilometer.
Validation of a Laser Profilometer for Measuring Pavement Rutting (Reference Device Method)
This test method defines the procedure for performing validation checks of the measurements of pavement rutting determined using a laser profilometer, by comparing them to the measurements from a static or manual reference device.
Pavement Surface Texture Repeatability and Bias Error Checks for a Laser Profilometer
This test method defines the procedure for conducting repeatability and bias of measurement checks for pavement surface texture measurements made by a laser profilometer.
Pavement Rutting Measurement with a Laser Profilometer
This test method defines the procedure for measuring the rutting of road pavements, determined by the direct measurement of the transverse profile of the road surface using a laser profilometer. The device must be capable of producing an accurate…
Pavement Roughness Measurement with an Inertial Profilometer
This test method defines the procedure for measuring the roughness of road pavements, determined from the direct measurement of the longitudinal profile of the road surface using an inertial profilometer.
Force Ratio of Polymer Modified Binders (ARRB Extensiometer)
This test method sets out the procedures for the determination of the force ratio and toughness of bitumen and PMBs under specific conditions of deformation using the ARRB extensiometer.
Characterisation of Flexural Stiffness and Fatigue Performance of Bituminous Mixes
The test method specifies procedures for the characterisation of the stiffness and fatigue behaviour of bituminous mixtures using a four-point bending test configuration.
Determination of Permanent Deformation Characteristics of Unbound Granular Materials by the Wheel-tracking Test
This method has been prepared as a complementary or alternative test to the repeated load triaxial (RLT) test for assessing the permanent deformation performance of granular material Wheel-tracking (as compared to RLT) better represents in-service…
Design of Bituminous Binder Blends to a Specified Viscosity Value
This test method provides a guideline for the design of a blend of RAP binder, virgin binder, and/or rejuvenating agent to a target viscosity.
Extractions of Bituminous Binder from Asphalt
This method has been developed for extracting bituminous binders from bituminous mixtures i.e. asphalt field samples, loose plant mix or reclaimed asphalt pavement.