Publications

Showing 1 - 10 of 79 Publications
Specification Framework for Polymer Modified Binders
This specification framework outlines the requirements for PMBs and crumb rubber modified binders for use in both sprayed sealing and asphalt applications.
Austroads Test Methods and Specifications
This document provides a hyperlinked list of the Austroads Test Methods and Specifications.
Flexural Beam Test Methods for Cemented Materials
This test method describes the methods for the determination of the flexural modulus, strength and fatigue characteristics of laboratory‑manufactured cemented materials using four point bending techniques.
Stress Ratio of Bituminous Binders using the Dynamic Shear Rheometer
This test method sets out the procedures for the measurement of the stress ratio of binder samples under specific conditions using the dynamic shear rheometer (DSR). A major failure mode of sprayed seals and asphalt pavements is fatigue cracking of…
Calibration of Bitumen Sprayers: Volumetric Calibration of Bitumen Pumping Systems
This test method is for bitumen sprayers as specified in AGPT/T530 Calibration of bitumen sprayers: general introduction and list of methods. It sets out the procedures for determining pump volumetric output, and is based on approach of using a…
Viscosity of Calibration Fluid
This test method sets out the procedure for validating the calibration fluid. The calibration fluid is used for volumetric calibration of bitumen sprayer pumps (AGPT/T531), and also for two methods of determining transverse distribution of bitumen…
Calibration of Bitumen Sprayers: Transverse Distribution by Fixed Pit Facility
This test method is for bitumen sprayers as specified in AGPT/T530 Calibration of bitumen sprayers: general introduction and list of methods. It sets out the procedures for determining the transverse distribution of bitumen sprayers, and is based on…
Calibration of Bitumen Sprayers: Transverse Distribution by Field Mat
This test method is for bitumen sprayers as specified in AGPT/T530 Calibration of bitumen sprayers: general introduction and list of methods. It sets out the procedures for determining the transverse distribution of bitumen sprayers, and is based on…
Calibration of Bitumen Sprayers: Transverse Distribution by Portable Trough
This test method is for bitumen sprayers as specified in AGPT/T530 Calibration of bitumen sprayers: general introduction and list of methods. It sets out the procedures for determining the transverse distribution of bitumen sprayers, and is based on…
Road Speed and Distance Calibration
This test method sets out the procedure for determining the accuracy of road speed indicators used on bitumen sprayers. The road speed of the bitumen sprayer is used in conjunction with the pump volumetric output to enable bituminous materials to be…