Publications

Guide to Pavement Technology Part 5: Pavement Evaluation and Treatment Design provides advice for the investigation of existing sealed road pavements and the selection and design of pavement strategies/treatments. It covers pavement investigation,…

The use of stabilisation technology for stabilising and recycling materials for pavement construction and maintenance is widely accepted as a cost-effective method of improving long‑term performance and reducing whole-of-life costs of modern,…

This webinar, presented on 11 April 2019, gives an overview of the key changes to the Guide and the significant advances in the areas of stabilisation or road pavements.

This webinar, presented on 31 October 2018, provides an overview of the key changes to the Guide to Pavement Technology Parts 4F and 4K, and the significant advances in the areas of binder specifications and sprayed seal design.

Guide to Pavement Technology Part 4K: Selection and Design of Sprayed Seals is a guide to the procedures for the selection and design of sprayed seals. This is an update of previous Austroads procedures based on the philosophy of filling up voids in…

Guide to Pavement Technology Part 2: Pavement Structural Design provides advice for the structural design of sealed road pavements. The advice has been generally developed from the approaches followed by the Austroads member agencies. However, as it…

This linked index of the Pavement Work Tips is designed to help practitioners easily access the more than 50 publications in the Work Tips collection.

There is a need to improve the Austroads procedures for mix design and structural design of foamed bitumen stabilised (FBS) materials. This final report summarises the mix design test methods developed within the context of an Austroads mix design…

This webinar, presented on 14 June 2018, provides an overview of the updated Austroads microsurfacing guidelines and model specification. It covers: major changes to the microsurfacing guidelines and specifications related test methods materials and…

Guidelines and Specification for Microsurfacing provides guidelines for the use of microsurfacing treatments in Australia. Microsurfacing is presently the only type of bituminous slurry surfacing applied in Australia. The document was produced by…