Publications

Filter
Topic
Publication State
Showing 1 - 10 of 213 Publications
Relationships Between Cutter Oil Properties and Sprayed Seal Performance
This study investigated the relationship between cutter oil properties and sprayed seal performance so that this information could be used as a basis for updating Australian Standard 3568. AS 3568 specifies the properties of four different types of…
Webinar: Properties of General-purpose Cement with Increased Percentages of Limestone
This webinar, presented on 15 October 2019, provides an overview of an Austroads project that investigated whether cements with elevated limestone content would perform satisfactorily in ambient-cured and precast concretes subjected to aggressive…
Properties of General-purpose Cement with Increased Percentages of Limestone
This report presents the results of a research project commissioned by Austroads to investigate whether the currently used Australian general-purpose (GP) cement which complies with AS 3972, and which may contain up to 7.5% limestone as a mineral…
Accelerated Long-term Ageing Methods for Sprayed Sealing Binders: A Field Validation Study
This report presents the results of a field validation study conducted as part of the development of a new long term ageing test for polymer modified binders used in sprayed seals in Australia. Unaged samples of binders were collected during the…
Webinar: Development of a Sprayed Seal Binder Cracking Test
This webinar, presented on 8 August 2019, provides an overview of an Austroads project that developed a new sprayed seal binder cracking test and compared the performance of polymer modified binders (PMBs).
Webinar: Relationships Between Cutter Oil Properties and Sprayed Seal Performance
This webinar, presented on 11 July 2019, provides an overview of an Austroads project that compared the test properties of seven commercially available cutter oils with their sprayed seal performance.
Performance of Asphalt and Spray Grade PMBs in Sprayed Seals
The Australian polymer modified binder (PMB) specification (AGPT/T190) currently requires different binder grades to be used in sprayed sealing and asphalt applications. This study compared the sprayed seal performance of PMBs representing four AGPT/…
Flexural Beam Test Methods for Cemented Materials
This test method describes the methods for the determination of the flexural modulus, strength and fatigue characteristics of laboratory‑manufactured cemented materials using four point bending techniques.
Webinar: Geopolymer Concrete and its Applications
This webinar, presented on 1 May 2018, outlines the findings of an Austroads geopolymer concrete project and a current update of the use, monitoring and specification of geopolymer concrete by VicRoads over the past nine years. The webinar was…
Austroads LTPP/LTPPM Study - Summary Report 2016–17

The report provides a summary of works undertaken during the period 2016–17 for the Austroads project AT1064 – Long-term pavement performance (LTPP).

Austroads has funded the long-term pavement performance study since late 1994. The project monitors…