Publications

Filter
Topic
Publication State
Showing 1 - 10 of 289 Publications
Webinar: Properties of General-purpose Cement with Increased Percentages of Limestone
This webinar, presented on 15 October 2019, provides an overview of an Austroads project that investigated whether cements with elevated limestone content would perform satisfactorily in ambient-cured and precast concretes subjected to aggressive…
Properties of General-purpose Cement with Increased Percentages of Limestone
This report presents the results of a research project commissioned by Austroads to investigate whether the currently used Australian general-purpose (GP) cement which complies with AS 3972, and which may contain up to 7.5% limestone as a mineral…
Webinar: Geopolymer Concrete and its Applications
This webinar, presented on 1 May 2018, outlines the findings of an Austroads geopolymer concrete project and a current update of the use, monitoring and specification of geopolymer concrete by VicRoads over the past nine years. The webinar was…
Guide to Bridge Technology Part 1: Introduction and Bridge Performance
Guide to Bridge Technology Part 1 provides general information about bridge design and construction. Topics covered in this Part include factors affecting bridge performance, their relationship to bridge design standards, and the evolution of…
Guide to Bridge Technology Part 5: Structural Drafting
Guide to Bridge Technology Part 5 sets out the principles involved in the presentation of bridge structural drawings and is intended to give engineers and draft persons at all levels a sound guide in drafting presentation and information. The Guide…
Guide to Bridge Technology Part 4: Design Procurement and Concept Design
Guide to Bridge Technology Part 4 provides guidance about effectively specifying and scoping contractual requirements for bridge design parameters, particularly for design/construct and similar contracts for bridge procurement. This guidance is…
Guide to Bridge Technology Part 2: Materials
Guide to Bridge Technology Part 2 covers all aspects of the common building materials available to the engineer including concrete, masonry, metallic and non-metallic materials and timber. This Part discusses material characteristics, their…
Guide to Bridge Technology Part 6: Bridge Construction
To ensure that bridges are properly constructed in accordance with the design drawings and specifications, engineers need to be well-informed on all aspects of their design and construction, including awareness of the problems that may arise and the…
Guide to Bridge Technology Part 3: Typical Superstructures, Substructures and Components
Guide to Bridge Technology Part 3 discusses the need for the bridge designer to address the specific requirements such as the transporting of goods and services, development of flood free routes, navigational clearances, longer spans, and…
Guide to Pavement Technology Part 4C: Materials for Concrete Road Pavements
Guide to Pavement Technology Part 4C: Materials for Concrete Road Pavements summarises aspects of Australian and New Zealand practice in materials for use in concrete road pavements including: base concrete and lean-mix concrete subbase concrete…