Publications

Filter
Topic
Publication State
Showing 1 - 10 of 230 Publications
Guide to Bridge Technology Part 1: Introduction and Bridge Performance
Guide to Bridge Technology Part 1 provides general information about bridge design and construction. Topics covered in this Part include factors affecting bridge performance, their relationship to bridge design standards, and the evolution of…
Guide to Bridge Technology Part 5: Structural Drafting
Guide to Bridge Technology Part 5 sets out the principles involved in the presentation of bridge structural drawings and is intended to give engineers and draft persons at all levels a sound guide in drafting presentation and information. The Guide…
Guide to Bridge Technology Part 4: Design Procurement and Concept Design
Guide to Bridge Technology Part 4 provides guidance about effectively specifying and scoping contractual requirements for bridge design parameters, particularly for design/construct and similar contracts for bridge procurement. This guidance is…
Guide to Bridge Technology Part 2: Materials
Guide to Bridge Technology Part 2 covers all aspects of the common building materials available to the engineer including concrete, masonry, metallic and non-metallic materials and timber. This Part discusses material characteristics, their…
Guide to Bridge Technology Part 6: Bridge Construction
To ensure that bridges are properly constructed in accordance with the design drawings and specifications, engineers need to be well-informed on all aspects of their design and construction, including awareness of the problems that may arise and the…
Guide to Bridge Technology Part 3: Typical Superstructures, Substructures and Components
Guide to Bridge Technology Part 3 discusses the need for the bridge designer to address the specific requirements such as the transporting of goods and services, development of flood free routes, navigational clearances, longer spans, and…
Accelerated Evaluation of the Effectiveness of Supplementary Cementitious Materials to Suppress Damaging AAR Expansion in Concrete Structures

This report provides the results of testing of three potentially reactive aggregates by the accelerated mortar bar test (AMBT) and the concrete prism test (CPT).

The tests were conducted using reference mixes, which contained plain Portland cement as…

A Rail Bridge in Twenty Days: The Torrens To Torrens North:South Corridor Upgrade
The Torrens Road to Torrens River (T2T) project forms part of the overall North-South Road Corridor upgrade in Adelaide, South Australia and incorporates many components such as a new lowered motorway, road, service and pedestrian bridges, retaining…
Replacement Of Four Long Bridges In Fiji Islands
Four bridges in the Fiji Islands were recently replaced using a Design and Construction procurement method for the Fiji Road Authority. The bridges provided vehicle, pedestrian and Fiji Sugar Corporation cane trains over waterways subjected to…
Epping To Thornleigh Third Tracking (Ettt) Project - M2 Bridge Alternative Design, Sydney
The existing rail lines at this location sit on a marginally stable embankment of 1.5:1 slope and height varying between 6m to 15m. The existing lines cross the M2 motorway via an under-bridge and Devlin’s creek via an old masonry arch culvert.