Publications

Filter
Topic
Publication State
Showing 31 - 40 of 276 Publications
Heavy Vehicle Horizontal Stresses and Pavement Surface Performance

This report presents the findings of Austroads Project AT1540 Understanding the impact on pavement surfaces from next generation freight vehicles and developing practical network prediction models and responses. The main purpose of the project was…

Improved Laboratory Characterisation of the Deformation Properties of Granular Materials

This report examines the capacity of the extra-large wheel-tracking laboratory test method to predict the in-service performance of granular materials.

Rutting is a common distress mode of unbound granular bases under thin bituminous surfacings.

Five…

Guide to Pavement Technology Part 4F: Bituminous Binders
Guide to Pavement Technology Part 4F: Bituminous Bindersprovides guidance on the use of bituminous materials in road construction and maintenance. Bituminous materials include bitumen obtained from refining crude petroleum oil and products derived…
High Modulus High Fatigue Resistance Asphalt (EME2) Technology Transfer: Final Report

EME2 mixes are produced using a hard paving grade bitumen applied at a high binder content (approximately 6%). Compared to conventional asphalt bases with unmodified binders, EME2 asphalt is characterised by high stiffness, high durability, superior…

Austroads LTPP/LTPPM Study - Summary Report 2015-16

This report provides a summary of activities completed during 2015–16 for the Austroads long term pavement performance monitoring project.

Austroads has funded the long-term pavement performance study since late 1994. The project monitors the…

Revised Interim Works Effect Models

This study sought to extend the understanding of pavement works effects (WE) by extending the scope of WE treatments and evaluation measures previously used.

The study was based on data extracted from Austroads long?term pavement performance (LTPP)…

Asphalt Fatigue Damage Healing and Endurance Limits: Guide Implementation Options

Overseas research has suggested that asphalt fatigue endurance limit may exist, where applied strain is sufficiently low no fatigue damage accumulates in the asphalt as the rate of asphalt healing exceeds the rate of damage accumulation. The…

Development of a Binder Test to Rank the Low Temperature Cracking Resistance of Polymer Modified Binders Stage 2: Hard Binders

This report describes the results obtained during the second year of work (2015–16) into the development of a binder test that can rank the low temperature cracking performance of PMBs.

Studies conducted during the first year of work (2014–15)…

Permeability of Sprayed Seals: Literature Review

This report describes a literature review on the permeability of sprayed seal surfacings. This review work was conducted to explore the permeability limits of sprayed seal surfacings, and to determine the influencing factors which allow seals to…

Effect of Heavy Vehicle Traffic in Sprayed Seal Design

The principal aim of this work was to examine the effect of heavy vehicle loading on sprayed seals, in order to incorporate such loading impacts into the Austroads sprayed seal design method.

The current sprayed seal design method uses an equivalent…