Publications

Filter
Topic
Publication State
Showing 1 - 10 of 58 Publications
Performance Requirements for Bitumen Sprayers
  • AP-T262-19 Edition: 2.0
  • 12 Sep 2019
  • Pavement

This document sets out the performance requirements expected of bitumen sprayers operating in Australia and New Zealand.

For a consistent and high quality of sprayed sealing work to be undertaken, and for sprayed sealing to remain a viable surfacing…

Webinar: Relationships Between Cutter Oil Properties and Sprayed Seal Performance
This webinar, presented on 11 July 2019, provides an overview of an Austroads project that compared the test properties of seven commercially available cutter oils with their sprayed seal performance.
Relationships Between Cutter Oil Properties and Sprayed Seal Performance
This study investigated the relationship between cutter oil properties and sprayed seal performance so that this information could be used as a basis for updating Australian Standard 3568. AS 3568 specifies the properties of four different types of…
Guide to Pavement Technology Part 4D: Stabilised Materials
The use of stabilisation technology for stabilising and recycling materials for pavement construction and maintenance is widely accepted as a cost-effective method of improving long‑term performance and reducing whole-of-life costs of modern,…
Webinar: Guide to Pavement Technology Part 4D: Stabilised Materials
This webinar, presented on 11 April 2019, gives an overview of the key changes to the Guide and the significant advances in the areas of stabilisation or road pavements.
Deformation Performance of Foamed Bitumen Stabilised Pavements Under Full-scale Accelerated Loading
This report details the first phase of Austroads project TT2046 Improving the Cost Effectiveness of Foamed Bitumen Stabilised Pavements which evaluated the deformation performance of foamed bitumen stabilised materials
Webinar: Bituminous Binders and Selection and Design of Sprayed Seals: Guide to Pavement Technology Parts 4F and 4K
This webinar, presented on 31 October 2018, provides an overview of the key changes to the Guide to Pavement Technology Parts 4F and 4K, and the significant advances in the areas of binder specifications and sprayed seal design.
Design and Performance of Foamed Bitumen Stabilised Pavements
There is a need to improve the Austroads procedures for mix design and structural design of foamed bitumen stabilised (FBS) materials. This final report summarises the mix design test methods developed within the context of an Austroads mix design…
Taking Representative Samples of Bituminous Binders
This work tip provides guidance on binder sampling to ensure that consistent and reliably representative samples are obtained so that any test results: represent, as near as practicable, an average of a consignment or batch; or detect any variation…
Guide to Pavement Technology Part 4F: Bituminous Binders
Guide to Pavement Technology Part 4F: Bituminous Bindersprovides guidance on the use of bituminous materials in road construction and maintenance. Bituminous materials include bitumen obtained from refining crude petroleum oil and products derived…