Publications

Showing 11 - 20 of 381 Publications
Specification Framework for Polymer Modified Binders
This specification framework outlines the requirements for PMBs and crumb rubber modified binders for use in both sprayed sealing and asphalt applications.
Guide to Pavement Technology Part 4D: Stabilised Materials
The use of stabilisation technology for stabilising and recycling materials for pavement construction and maintenance is widely accepted as a cost-effective method of improving long‑term performance and reducing whole-of-life costs of modern,…
Webinar: Guide to Pavement Technology Part 4D: Stabilised Materials
This webinar, presented on 11 April 2019, gives an overview of the key changes to the Guide and the significant advances in the areas of stabilisation or road pavements.
Webinar: Long-Term Pavement Performance Study
This webinar, presented on 7 March 2019, provides an overview of Austroads' long-term pavement performance study.
Deformation Performance of Foamed Bitumen Stabilised Pavements Under Full-scale Accelerated Loading
This report details the first phase of Austroads project TT2046 Improving the Cost Effectiveness of Foamed Bitumen Stabilised Pavements which evaluated the deformation performance of foamed bitumen stabilised materials
Long-term Pavement Performance Study: Final Report
This report summarises the outputs and benefits of the long‑term pavement performance (LTPP) study which ran from 1994 to 2018 and was funded by Austroads. The study had four primary objectives: to enhance road asset management strategies…
Flexural Beam Test Methods for Cemented Materials
This test method describes the methods for the determination of the flexural modulus, strength and fatigue characteristics of laboratory‑manufactured cemented materials using four point bending techniques.
Webinar: Bituminous Binders and Selection and Design of Sprayed Seals: Guide to Pavement Technology Parts 4F and 4K
This webinar, presented on 31 October 2018, provides an overview of the key changes to the Guide to Pavement Technology Parts 4F and 4K, and the significant advances in the areas of binder specifications and sprayed seal design.
Guide to Pavement Technology Part 4K: Selection and Design of Sprayed Seals
Guide to Pavement Technology Part 4K: Selection and Design of Sprayed Seals is a guide to the procedures for the selection and design of sprayed seals. This is an update of previous Austroads procedures based on the philosophy of filling up voids in…
Guide to Pavement Technology Part 2: Pavement Structural Design
Guide to Pavement Technology Part 2: Pavement Structural Design provides advice for the structural design of sealed road pavements. The advice has been generally developed from the approaches followed by the Austroads member agencies. However, as it…