Publications

Showing 1 - 10 of 457 Publications
Webinar: Properties of General-purpose Cement with Increased Percentages of Limestone
This webinar, presented on 15 October 2019, provides an overview of an Austroads project that investigated whether cements with elevated limestone content would perform satisfactorily in ambient-cured and precast concretes subjected to aggressive…
Properties of General-purpose Cement with Increased Percentages of Limestone
This report presents the results of a research project commissioned by Austroads to investigate whether the currently used Australian general-purpose (GP) cement which complies with AS 3972, and which may contain up to 7.5% limestone as a mineral…
Guide to Bridge Technology: Set
Easy access to all eight parts of the Guide to Bridge Technology.
Guide to Bridge Technology Part 8: Hydraulic Design of Waterway Structures
Guide to Bridge Technology Part 8 provides a guideline for issues related to the waterway design of bridges. It covers various topics such as design flood standards and estimation methods, general considerations in waterway design and design…
Bridge Assessment: A comparison of approaches by bridge engineers and the Performance Based Standards Scheme
This document describes the discrepancy between the tiers of bridge assessment documented in the Heavy Vehicle National Law’s Performance Based Standards (PBS) scheme and the tiers of assessment Austroads bridge engineers adopt when conducting…
Higher Order Bridge Assessment in Australia
This report documents the options and methodologies available to conduct higher order assessments of existing bridges which are encouraged by but not currently defined by the new AS 5100.7. This was achieved by investigating the current…
Webinar: Geopolymer Concrete and its Applications
This webinar, presented on 1 May 2018, outlines the findings of an Austroads geopolymer concrete project and a current update of the use, monitoring and specification of geopolymer concrete by VicRoads over the past nine years. The webinar was…
Implementation of a Nationally Consistent Framework for the Assessment of Bridges in Australia
This report extends on the work previously conducted by Austroads in investigating the development and implementation of a national automated bridge assessment framework. The work outlines the ongoing validation works and recommends a set of…
Guide to Bridge Technology Part 1: Introduction and Bridge Performance
Guide to Bridge Technology Part 1 provides general information about bridge design and construction. Topics covered in this Part include factors affecting bridge performance, their relationship to bridge design standards, and the evolution of…
Guide to Bridge Technology Part 5: Structural Drafting
Guide to Bridge Technology Part 5 sets out the principles involved in the presentation of bridge structural drawings and is intended to give engineers and draft persons at all levels a sound guide in drafting presentation and information. The Guide…