Publications

Filter
Topic
Publication State
Showing 1 - 10 of 71 Publications
Webinar: Bituminous Binders and Selection and Design of Sprayed Seals: Guide to Pavement Technology Parts 4F and 4K
This webinar, presented on 31 October 2018, provides an overview of the key changes to the Guide to Pavement Technology Parts 4F and 4K, and the significant advances in the areas of binder specifications and sprayed seal design.
Guide to Pavement Technology Part 4K: Selection and Design of Sprayed Seals
Guide to Pavement Technology Part 4K: Selection and Design of Sprayed Seals is a guide to the procedures for the selection and design of sprayed seals. This is an update of previous Austroads procedures based on the philosophy of filling up voids in…
Webinar: Guidelines and Specifications for Microsurfacing
This webinar, presented on 14 June 2018, provides an overview of the updated Austroads microsurfacing guidelines and model specification. It covers: major changes to the microsurfacing guidelines and specifications related test methods materials and…
Guidelines and Specifications for Microsurfacing
Guidelines and Specification for Microsurfacing provides guidelines for the use of microsurfacing treatments in Australia. Microsurfacing is presently the only type of bituminous slurry surfacing applied in Australia. The document was produced by…
Validation of Revised Austroads Sprayed Seal Design Approaches: Site Inspection

This report details investigations that were conducted to verify the new Austroads sprayed seal design guidelines.

To verify the appropriateness of the proposed basic voids factor (Vf), and the initial sealing design approach (and also to validate…

Development of a Sprayed Seal Binder Cracking Test

This report describes research into development of a laboratory sprayed seal binder cracking test which can be used to measure the relative fatigue cracking resistance of thin binder films which have thicknesses comparable to the thicknesses of the…

Permeability of Sprayed Seals: Literature Review

This report describes a literature review on the permeability of sprayed seal surfacings. This review work was conducted to explore the permeability limits of sprayed seal surfacings, and to determine the influencing factors which allow seals to…

Selection and Design of Initial Treatments for Sprayed Seal Surfacings

This document is an update of the design of initial treatments for sprayed seal surfacing.

The information contained within this document supersedes that found in Austroads AP-T68-06 Update of the Austroads Sprayed Seal Design Method, and replaces…

Effect of Heavy Vehicle Traffic in Sprayed Seal Design

The principal aim of this work was to examine the effect of heavy vehicle loading on sprayed seals, in order to incorporate such loading impacts into the Austroads sprayed seal design method.

The current sprayed seal design method uses an equivalent…

Seal Design Improvement for Low Volume Roads

The current version of the Austroads sprayed seal design method was published in 2006 and has been in use for the last nine years. During recent times, a number of sprayed sealing practitioners have indicated that the basic voids factor for single/…