Table of Contents


Austroads 2003, Sprayed seals: pre-spraying to correct surface texture, AP-PWT36-03, Austroads, Sydney, NSW.

Austroads 2004, High pressure water retexturing, AP-PWT44-04, Austroads, Sydney, NSW.

Austroads 2005a, RoadFacts 2005: an overview of the Australian and New Zealand road systems,AP-G18-05, Austroads, Sydney, NSW.

Austroads 2005b, Geotextile reinforced seals, AP-G37-05, Austroads, Sydney, NSW.

Austroads 2006, Guide to pavement technology: part 4D: stabilised materials, AGPT04D-06, Austroads, Sydney, NSW.

Austroads 2008, Modified surface texture depth (Pestle method), AGPT-T250-08, Austroads, Sydney, NSW.

Austroads 2009a, Guide to pavement technology: part 3: pavement surfacings, AGPT03-09, Austroads, Sydney, NSW.

Austroads 2009b, Guide to pavement technology: part 8: pavement construction, AGPT08-09, Austroads, Sydney, NSW.

Austroads 2009c, Guide to asset management: part 4: program development and implementation, AGPT08-09, Austroads, Sydney, NSW.

Austroads 2010a, Treatment of bleeding or flushed surfaces, AP-PWT07-10, Austroads, Sydney, NSW.

Austroads 2010b, Preparing pavements for resealing, AP-PWT09-10, Austroads, Sydney, NSW.

Austroads 2010c, Ball penetration test, AGPT-T251-10, Austroads, Sydney, NSW.

Austroads 2010d, Sprayed seal cutting practice, AP-PWT14-10, Austroads, Sydney, NSW.

Austroads 2014a, Double/double primerseal inspections, AP-T276-14, Austroads, Sydney, NSW.

Austroads 2014b, Joints in geotextile reinforced seals, AP-PWT53-14, Austroads, Sydney, NSW.

Austroads 2014c, Specification framework for polymer modified binders, AGPT-T190-14, Austroads, Sydney, NSW.

Austroads 2015, Bituminous materials safety guide, AP-G41-15, Austroads, Sydney, NSW.

Austroads, 2016, Pavement surface texture measurement with a laser profilometer, AGAM-T013-16, Austroads, Sydney, NSW.

Austroads 2017, Guide to pavement technology: part 4F: bituminous binders, AGPT04F-17, Austroads, Sydney, NSW.

Austroads Pavements Reference Group 2003, Technical note 13: control of moisture in pavements during construction, Austroads, Sydney, NSW.

Bureau of Meteorology 2016, State of the climate 2016, BOM & CSIRO, Canberra, ACT, viewed 27 February 2018, <>.

EPA Victoria 2002, Guidelines for environmental management: spraying bituminous materials, publication 880, EPA Victoria, Melbourne, Vic.

Hanson, FM 1935, ‘Bituminous surfacing treatment of rural highways’, Proc. NZ Society of Civil Engineers, vol. 21, pp. 89-179.

Holtrop, W 2008, ‘Sprayed sealing practice In Australia’, International sprayed sealing conference, 1 st, 2008, Adelaide, South Australia, ARRB Group, Vermont South, Vic, 27 pp.

Januszke, RM & Booth, EHS 1992, ‘Soluble salt damage to sprayed seals on the Stuart Highway Prevention and Maintenance’, Department of Road Transport, Materials Technology Research and Development Program, South Australia.

National Association of Australian State Road Authorities 1988, Review of sprayed seal design, technical report NTR-5, NAASRA, Sydney, NSW.

Roads and Traffic Authority 1993, A Guide to the use of slag in roads, RTA, Sydney, NSW.

Roads and Traffic Authority 1997, Sprayed sealing guide, 2nd edn, document no.
TP-GDL-001, RTA, Milsons Point, NSW.

Transit New Zealand 1981, Texture by the sand circle method measurements, TNZ T/03, Transit New Zealand, Wellington, NZ.

Transit New Zealand, Road Controlling Authorities & Roading New Zealand 2005, Chipsealing in New Zealand, Transit New Zealand, Wellington, NZ.

VicRoads & Geopave 2004, Bituminous sprayed surfacing manual, technical bulletin no. 45, VicRoads, Kew, Vic.

VicRoads 2014, Checklist for the construction & preparation of granular pavements, version 1, VicRoads, Kew, Vic.

Australian/New Zealand Standards

AS 1141, Methods for sampling and testing aggregates.

AS 1141.15, Methods for sampling and testing aggregates: Flakiness index.

AS 1141.20.1, Methods for sampling and testing aggregates: average least dimension: direct measurement (nominal size 10 mm and greater).

AS 1141.20.2, Methods for sampling and testing aggregates: average least dimension: direct measurement (nominal sizes 5 mm and 7 mm).

AS 1141.20.3, Methods for sampling and testing aggregates: average least dimension: calculation (nomograph).

AS 1160, Bituminous emulsions for construction and maintenance of pavements.

AS 2008, Residual bitumen for pavements.

AS 2157, Cutback bitumen.

AS 2758.2, Aggregates and rock for engineering purposes: part 2: aggregates for sprayed bituminous surfacing.

AS 3706.1, Geotextiles: methods of test: part 1: general requirements, sampling, conditioning, basic physical properties and statistical analysis.

ASTM 2005, Standard test method to determine asphalt retention of paving fabrics used in asphalt paving for full-width application, D6140-00.

NZS 4407, Methods of sampling and testing road aggregates.